Thermal insulation compound STHERMIZOL represents a
completely new method of thermal insulation of buildings. Its main
component is special thermal-ceramic filler that minimizes, with
minimum thickness of STHERMIZOL layer 0,5- 1 mm, heat leakage from
rooms.
It creates a partial vacuum layer on
the applied surface, increases thermal resistance, and
simultaneously is capable of reflecting as much as 70 % of radiant
heat back to the interior. STHERMIZOL is also an excellent solution
to problems with mould on walls.
The application process is simple, and
can be coped with by almost everyone. The filler shall be applied
interior walls in a very simple way by a trowel, a roller, or a
brush in a 0,5-1 mm thick layer. It can also be applied by
spraying. The compound can be tinted or decorated with water-based
paints after application.
Main advantages:
-
simple and quick process of thermal
insulating of buildings from interior
-
no scaffolding and a large number of
craftsman needed
-
helps deal with problems with wall
moulding due to of improper ventilation
-
can be used for buildings where
historical plaster must be maintained
-
measuring proved that after the
application of STHERMIZOL to room walls, the consumption of heating
energy decreased by *20-40 %
-
energy savings when air-conditioning
units are utilised in summer
Methods of application:
Package: 3 L, 10 L, 20 L
Upon request, other packages can be available.
Instructions for
use:
The compound contains first-rate PVA
dispersions due to which it well adheres to almost all types of
base materials, such as concrete, gypsum plasters, lime-cement
plasters, plasterboard, prefabricated panels as well as wood. The
base shall be solid (not crumbly), free of dust, impurities and
mould; if there are more paint layers on the wall, it is
recommended to remove them first mechanically. First, primer shall
be applied to the base. Roughness of the surface shall be levelled
with ROMBA versatile joint compound - this considerably reduces the
consumption of STHERMIZOL. Afterwards, STHERMIZOL can be applied on
such dry base.
Application: Prior to
application, the compound can be diluted with water and stirred
slowly so that the filler is not damaged!
Application by means of a joint
knife or a trowel: using such method, you can apply the
compound directly on pre-treated wall surface without any dilution.
Apply a layer approx. 1 mm thick and let it dry up for at least 2
hours (at the temperature of 20°C). Subsequently, you can finely
grind the surface with a grinding, grid grain size 120, to remove
roughness so that a 0,5-1 mm thick layer is maintained. After
complete dry up of the layer, you can decorate it with interior
paint.
Application by a
roller: in 2 layers so that the thickness of min. 0.5 mm
is reached. The type of roller to be used - fine foam, velour or
nylon. dilute with water until you obtain slush-like substance; dip
the roller in and spread the compound slightly on the pre-treated
surface
Application by
spraying: higher pressure may damage the compound filler.
dilute according to the instructions for use of the spraying
device; use a nozzle 3 mm in diameter and the pressure up to 5
bar;
The consumption and drying
time: The consumption of the compound, when applied by a
trowel on a pre-treated even surface in 1mm layer, is 1L/m2.
When applied by a roller - 0,5 mm thick
layer- 0,5 L/m2.
When applied by spraying in 0.3-0.5 mm
thick layer, the consumption is 0,3-0,5 L/m2.
The drying time depends on the
absorption capacity of the base material, temperature, humidity as
well as interior ventilation; for 1 mm thick layer it is 2-4 hours
at the temperature of 20°C and the humidity of 60 %.
Storage, transport and
durability: Store in a dry place at the temperatures
between + 5°C and 30°C; the durability is 12 months from the date
of production in unopened containers while observing the storage
conditions.
